A White and Purple Pack of 56888 G3 Sterile White Nitrile Gloves
A Brown and Purple Case of 56888 G3 Sterile White Nitrile Gloves
A Person in a White Coverall Donning a Pair of 56888 G3 Sterile White Nitrile Gloves
A Close Up of the Fingertips of a 56888 G3 Sterile White Nitrile Glove
HC61160 KIMTECH PURE* G3 Sterile White Nitrile Gloves - 30cm Hand Specific - Sentinel Laboratories Ltd
HC61160 KIMTECH PURE* G3 Sterile White Nitrile Gloves - 30cm Hand Specific - Sentinel Laboratories Ltd

56888 KIMTECH* G3 Sterile White Nitrile Gloves - 30cm Hand Specific (previously HC61160)

Regular price£326.42

Vendor: Kimtech
Code: HC61160 range
*Trademark of Kimberly-Clark Corporation

Kimtech™ G3 Sterile White Nitrile gloves provide enhanced sterile cleanroom protection for a wide range of contaminants. With a textured finish and skin-friendly nitrile composition, the hand-specific sterile gloves protect users and processes alike.


Quantity: 1 Case of 10 Bags x 20 Gloves (200 Gloves)


KIMTECH* Sterile G3 White Nitrile Gloves offer a highly advanced protection of processes, helping you to reduce the risk of contamination. Whether there is the need for rigid contamination control in the class ISO 3-4 critical environment or class ISO 5-8 controlled environment, KIMBERLY-CLARK PROFESSIONAL* provides a complete line of gloves, masks, apparel and wipers to meet these needs.

All KIMBERLY-CLARK PROFESSIONAL* Products are manufactured to exacting quality standards. Our rigorous process controls ensure every product performs above and beyond the required class or grade for your cleanrooms and clean manufacturing facilities. We continually review our product lines through certification, validation, independent testing and, most importantly, customer satisfaction to ensure your most valuable assets - your processes, your people and your reputation, are protected.

Product Qualities

  • Latex-Free
  • Silicone-Free
  • Low Endotoxin
  • 30cm Hand Specific Pairs
  • Packaged for Aseptic Donning
  • Fully Textured
  • Recommended for ISO Class 3 or higher cleanroom environments
  • Synthetic Nitrile Polymer (Acrylonitrile Butadiene)
  • Contains no natural rubber latex - reducing the potential for TYPE I glove -associated reactions
  • Beaded Cuff - for added strength and ease in donning
  • Walleted & pouched in polyethylene for cleanroom use
  • Formerly SAFESKIN* Sterile Critical Nitrile Gloves


UNSPSC Code 46181504

Quality Standards

  • This is a PPE Category III product classified by EC Council Directive 89/686/EEC. It is tested in accordance with the EN Norms EN420:2003
  • Packaged in a Class 100 Cleanroom
  • Meets or exceeds AQL level of 1.5 for pinholes
  • Manufactured in accordance with Quality System ISO 9001

EN Standards

Kimtech G3 Sterile White Nitrile Gloves conform to the following standards:

  • EN420:2003 - General requirements/standard for gloves
  • EN374-1:2003 - Protection against Chemical Splash
  • EN374-2:2003 - Level 2 protection against Micro-Organisms

For further information about EN Standards, please visit our EN Standards page.


  • Assured Compliance:- PPE Cat III according to Regulation (EU) 2016/425- EN ISO 374-1:2016 Type C (K) Chemical Splash protection- EN 374-4:2003 Resistance to degradation by chemicals- EN ISO 374-5:2016 Micro Organism and VIRUS Protection- ASTMD6978-05 cytotoxic drugs splash protection- Sterility Assurance Level (SAL) 10-6- Certificate of Analysis available online- Certificate of Sterility available online
  • Efficient, environmentally-friendly white nitrile construction, validated to a Sterility Assurance Level (SAL) of 10-6, and cleanroom-ready packaging that minimises waste without compromising safety.
  • The fully sterilised white nitrile material is stronger and leaner than latex, and features certified, high levels of contamination protection against particles, micro-organisms, viruses, cytotoxic drugs and chemical splash with low endotoxin level.
  • Gloves are hand-specific, disposable and white in colour with a high level of cleanliness.
  • Textured fingertips enhance grip and tactile sensitivity for safer and more efficient processes.
  • Beaded cuffs add strength to the gloves, reducing the risk of tearing and increasing their durability, while also reducing roll down for easier donning and doffing.
  • Contain no natural rubber latex, silicone or powder, reducing the risks of skin irritation for the wearer.
  • Available in a wide range of sizes, from 6.0 to 10.0.


This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Recently viewed